ENABLE ENGINEERING MODE/FACTORY MODE FOR ALL ONE PLUS DEVICES Skip to main content

Awaken OS OnePlus 6+6T New update 15th March 2022 Full Review and Test

 Last time on 5th of the March I gave you update blogpost for awaken OS oneplus 6 and 6T. That rom was pretty solid But still some users reported that mic issue in audio calls so Vikas aka Optimus and all awaken OS devs team has released new update on 15th March. Visually you will not see any difference in the rom but when you use it it's actually makes difference in usage than previous rom. As this rom is now encrypted by default you need to clean flash the rom so without wasting time lets get started for installation and review.  As you can see that last time I was on evolution-x android 12L rom. I will now start flashing of awaken os so first Download Awaken OS zip file and finalize zip OnePlus 6: DOWNLOAD OnePlus 6T: DOWNLOAD Finalize zip: DOWNLOAD If you are doing first time installation you need following files : TWRP for onepus6: DOWNLOAD TWRP for onepus6T: DOWNLOAD OxygenOS 11.1.2.2 FIRMWARE for OnePlus 6: (if you are not on this base rom both slots A...
Post a Comment

ENABLE ENGINEERING MODE/FACTORY MODE FOR ALL ONE PLUS DEVICES


What is engineering mode/Factory mode:

Engineering mode or Engmode is a special advanced menu in every android device which is hidden from other settings. Engineering Mode consists of Many features and settings that are not accessible by normal settings or Apps. You can also perform various performance tests and tweaks using Engineering Mode.

Features available in engineering mode:

1.Change LTE band and other network setting

2.Boost device audio than normal.

3.Customize hardware and camera settings

4.Increase WiFi range and signal

5.Increase Battery performance

6.Customize Bluetooth

7.Change MAC address of your device

8.change IMEI code of android device

9.CPU management

10.Recovery Mode

11.Unlock some root features without rooting

11.Change network setting including LTE band

12. One plus 8 and 8 pro you can use this mode to enable photochrome filter to acess xray mode in camera which was disabled by OnePlus.Instead of above there are many others too available

OnePlus is famous among tinkerers for having a rich collection of diagnostic tools beyond the battery health checker. As a matter of fact, earlier builds of Oxygenos OS on devices like the OnePlus 3, 3T, and OnePlus 5 shipped with an extremely low-level diagnostic testing application called “EngineerMode,” which could be exploited to grant root access without unlocking the bootloader. Later on, OnePlus removed the exploitable debugging code, renamed the app to “FactoryMode” 

OnePlus hides the “FactoryMode” app behind a unique unlock code for every smartphone they produce. 

The unlock code is derived from the primary IMEI of a OnePlus device. After deciphering how it’s generated, xda senior member AndroPlus wrote an unlock code generator that can unlock access to the Factory Mode app.

Warning: Be careful using OnePlus Factory Mode/Engineering Mode. There are many low-level tools and tests here that users aren’t meant to access, so you should only do this if you are aware of the risks and know what you’re doing.

Note: Keep in mind that the web-based unlocker doesn’t store your device’s IMEI. That being said, the IMEI of your device is a pretty sensitive piece of information, so don’t blindly share it with anyone.

You need IMEI number to be pasted in the mentinoed website and its generally safe because this process is developed by recognised developers at XDA you can search in the google with tags to verify

How to acess this feature:

Hey guys engineering mode also renamed by one Plus as factory mode has been disabled by OnePlus to access from dialer by dialing *#808#.

But most of ways to enable this mode includes root method but by following method you can enable it without root.

Steps:

1)Go to dialer and type *#06# and you will see your device IMEI number copy it by long pressing on it.

2)Now go to following link

CLICK BELOW LINK TO ACESS UNLOCK SITE

There you have to first select one of the two options permeantly unlock or unlock for 10 min. Some OnePlus devices not able to unlock permeantly like my one plus 6, OnePlus 7, 8 so you need to do trial and check.

3) so first select permeant factory mode unlock and you need to press convert tab

4) now you will get code copy it go to dialer again now dial *#*#5646#*#* you will see barcode scanning screen just swipe back and you need to paste your copied code here and hit ok.

5) If you see decrypted succefully then you done but if not go back to. Dialer copy IMEI nad go to the link select unlock for 10min and click convert and copy the code

6) go to dialer again press *#*#5646#*#*

And swipe back and enter the new code and click ok now you will definitely see succefully decrypted for 10min.

7) now in the diler type *#808# to access the factory mode.



That's it you have unlocked OnePlus hidden factory mode.

Here is small video tutorial to access this hidden mode without root




Labels:

Comments

Post a Comment

Popular posts from this blog

Update Adreno GPU drivers Vulkan to latest v615 any Device: Drastically improve performance gaming.

  OpenGL and Vulkan are two different grafix API in your GPU drivers.Vulkan are newest grafix api  launched with Android 7 and offers greater performance and better control of hardware allowing to boost grafix quality and optimization of android device. I was using vulkan version 502 on my oneplus 6 on android 12  Awaken rom  and will upgrade to version 615. Today I will give you process how can you update your vulkan grafix drivers to v615 for any SOC(System On chip) weather it is snapdragon or any other soc , that having adreno 600 or 700 series GPU. I done some geekbench test to prove how these updated driver drastically improves grafix performance on vulkan drivers. Also these GPU api will be used by any games by default to improve performance of the game still for BGMI I shown specific way how you can set vulkan api redering for BGMI game. All you need to be magisk rooted device, I have given cache cleaner in blogpost description these if these  drivers c...
Post a Comment
Read more

Samsung Galaxy Tab A 10.1 SM-T515/SM-T510 LineageOS 18.1 Android 11

 Hey Geeks...!  Let's Install lineage OS 18.1 Android 11 gsi ROM on Samsung Galaxy Tab A10.1 Note : It has some bugs but they are not deal breaking you can use it as a daily driver. If you're bored of Samsung's One UI 3.1 & want some adventure and new look to your device then Follow the below steps. Q. How to Install the Lineage OS 18.1 ?  -   For installation of this rom you need to install TWRP on your tablet if you didn't then watch the tutorial of it.    Watch Here  -   Now Download the ROM - Download!  -   Gapps >    Download!  -   Magisk >  Download! Download all the above files.  > Extract that gsi file and transfer the same in your tablet. > Boot tablet in a TWRP mode. > When you boot in TWRP then first click on the wipe option then select advanced wipe & select system and slide the bottom bar. > After that go to place where you placed your gsi image fil...
Post a Comment
Read more

Install any custom GSI rom on any device as dualboot rom

  Hey what up guys DSU LOADER is awesome implementation by Google to test generic system images that Google going to release new Android versions which can be loaded over the existing OS , with the single reboot we can go back to stock rom.Its only available in Android 10+ roms via developers setting there we gets DSU LOADER option, but that setting will load only compatible gsi packages available for your device when we tap on it , it will gets downloaded and flashed. But developers like phh has developed phh treble gsi rom using these images which are bootabale and working on lots of devices but to install them we need to follow tedious fastboot flashable or twrp flashable installation process which also wipes system, that I created in lots of YT videos. But now the new all DSU sideloader is available where we can load any gsi img, xz or gz file and test it , instead of that we can set specific userdata size for such images and use them as dualboot rom with your stock rom or c...
Post a Comment
Read more