How to update rooted OnePlus nord 2 with any incremental updates Skip to main content

Awaken OS OnePlus 6+6T New update 15th March 2022 Full Review and Test

 Last time on 5th of the March I gave you update blogpost for awaken OS oneplus 6 and 6T. That rom was pretty solid But still some users reported that mic issue in audio calls so Vikas aka Optimus and all awaken OS devs team has released new update on 15th March. Visually you will not see any difference in the rom but when you use it it's actually makes difference in usage than previous rom. As this rom is now encrypted by default you need to clean flash the rom so without wasting time lets get started for installation and review.  As you can see that last time I was on evolution-x android 12L rom. I will now start flashing of awaken os so first Download Awaken OS zip file and finalize zip OnePlus 6: DOWNLOAD OnePlus 6T: DOWNLOAD Finalize zip: DOWNLOAD If you are doing first time installation you need following files : TWRP for onepus6: DOWNLOAD TWRP for onepus6T: DOWNLOAD OxygenOS 11.1.2.2 FIRMWARE for OnePlus 6: (if you are not on this base rom both slots A...
Post a Comment

How to update rooted OnePlus nord 2 with any incremental updates


Hi guys if you are using OnePlus Nord 2 and rooted using my tutorial, you can search that tutorial in adress bar, but some users are facing issue while they are rooted and twrp installed on there phone.They can't able to Flash update through stock settings OR via twrp if they tries to flash it via twrp manually facing no wifi and Bluetooth issue is happening. 
 So today I will guide you here the process to flash any incremental update(updates which are short in size nearly 300mb)via twrp just we need update zip, vbmeta image and boot image of old oos version respective to your new update means if We are upgrading to A11 we need A10 boot img 
 
 U can use following commands to extract your current stock boot img after connecting to PC after connecting phone to pc just open cmd command by clicking shift+right click of mouse and select open command prompt here from drop down menu and then Type these commands and enter. After this your current rom boot.img will be saved inside stock SD card of device.  
adb shell 
dd if=/dev/block/sdc49 of=/sdcard/boot.img exit 

 Note: Remember this process will replace your twrp and removes root to gain root access. We need to repeat twrp installation shown in the following tutorial

 https://4utech85.blogspot.com/2021/10/root-and-twrp-for-oneplus-nord-2-5g.html 

 You can also gain root acess only by flashing magisk.zip file after step no 7 given under following instructions but I didn't tested it yet. 

 DOWNLOADS: Download update OOS 11.3 V11 (latest incremental updatefrom Telegram)  

We can also download update in system update process. Just download OTA update and when we boot in twrp just click install and then go to following folder there you will find update.zip
 
/data/OTA-package/update.zip 

 Download vbmeta: 
 boot.img( here we are using OOS 11.3 V10 because we want to upgrade to V11)

Instructions : 
 1) Download all file from the link given under this thread place them at one place on your phone so it can be easily accessible when we boot in TWRP. 
 2)Now to boot in TWRP use following root acess app called as advance reboot. Open it and click reboot to recovery 
Or you can use adb command and hit enter after connecting phone to pc in USB debugging mode it will also boots your device in recovery mode. adb reboot recovery 
 3) when phone boot in TWRP click install tab now go to folder where we placed All files. 
 4) click install image tab at bottom now you we see image files boot. img and vbmeta.img that we downloaded 
 5)now select boot.img and then select boot partation and slide bottom bar after successful installation
6)click reboot and select recovery phone will boots back to twrp( This step is optional) 
 7)Now again click Install and find our old folder now select update.zip(V11 incremental update zip) file and slide bottom bar it will take 2min for complete falshing of zip. 
 8)now agian click install now click install image and select vbmeta.img select vbmeta partation. 
 9)Now click reboot system phone will reboots and take 10min. Now you are successfully updated and have new OOS 11.3 A11 version on your phone without any issues. 
 
 Here Is the Small tutorial video: 



Labels:

Comments

Post a Comment

Popular posts from this blog

Update Adreno GPU drivers Vulkan to latest v615 any Device: Drastically improve performance gaming.

  OpenGL and Vulkan are two different grafix API in your GPU drivers.Vulkan are newest grafix api  launched with Android 7 and offers greater performance and better control of hardware allowing to boost grafix quality and optimization of android device. I was using vulkan version 502 on my oneplus 6 on android 12  Awaken rom  and will upgrade to version 615. Today I will give you process how can you update your vulkan grafix drivers to v615 for any SOC(System On chip) weather it is snapdragon or any other soc , that having adreno 600 or 700 series GPU. I done some geekbench test to prove how these updated driver drastically improves grafix performance on vulkan drivers. Also these GPU api will be used by any games by default to improve performance of the game still for BGMI I shown specific way how you can set vulkan api redering for BGMI game. All you need to be magisk rooted device, I have given cache cleaner in blogpost description these if these  drivers c...
Post a Comment
Read more

Samsung Galaxy Tab A 10.1 SM-T515/SM-T510 LineageOS 18.1 Android 11

 Hey Geeks...!  Let's Install lineage OS 18.1 Android 11 gsi ROM on Samsung Galaxy Tab A10.1 Note : It has some bugs but they are not deal breaking you can use it as a daily driver. If you're bored of Samsung's One UI 3.1 & want some adventure and new look to your device then Follow the below steps. Q. How to Install the Lineage OS 18.1 ?  -   For installation of this rom you need to install TWRP on your tablet if you didn't then watch the tutorial of it.    Watch Here  -   Now Download the ROM - Download!  -   Gapps >    Download!  -   Magisk >  Download! Download all the above files.  > Extract that gsi file and transfer the same in your tablet. > Boot tablet in a TWRP mode. > When you boot in TWRP then first click on the wipe option then select advanced wipe & select system and slide the bottom bar. > After that go to place where you placed your gsi image fil...
Post a Comment
Read more

Install any custom GSI rom on any device as dualboot rom

  Hey what up guys DSU LOADER is awesome implementation by Google to test generic system images that Google going to release new Android versions which can be loaded over the existing OS , with the single reboot we can go back to stock rom.Its only available in Android 10+ roms via developers setting there we gets DSU LOADER option, but that setting will load only compatible gsi packages available for your device when we tap on it , it will gets downloaded and flashed. But developers like phh has developed phh treble gsi rom using these images which are bootabale and working on lots of devices but to install them we need to follow tedious fastboot flashable or twrp flashable installation process which also wipes system, that I created in lots of YT videos. But now the new all DSU sideloader is available where we can load any gsi img, xz or gz file and test it , instead of that we can set specific userdata size for such images and use them as dualboot rom with your stock rom or c...
Post a Comment
Read more